Publicité
Les langues disponibles
Les langues disponibles
• TROUBLESHOOTING
Please check the following before contacting your after-sale services.
o
Problem
The
air
conditioner
does not work.
The cooling effect is not
good
The device is very noisy The air conditioner is not placed
The compressor does
not work
The
remote
control
does not work
Caution:
When the following abnormalities occur, turn the air conditioner off, pull out the plug, and
then contact a professional electrician.
Fuse and switch are often broken.
o
Power line is overheating or its coat is naked.
o
The unit produces abnormal odour or smoke.
o
Gebrauchsanweisung ○ Mode d'emploi ○ Istruzioni per l'uso ○ Instructions for use
Reasons
There is no electricity
The overflow indicator displays FL Discharge the water inside.
Ambient temperature is too low
or too high
In cooling mode, the room
temperature is lower than the set
temperature
In dehumidification mode, the
ambient temperature is low
There is direct sunlight
Doors or windows are open; there
are a lot of people; or in cooling
mode, there are other sources of
heat
The filter screen is dirty
The air inlet or outlet is blocked
on a flat surface
Overheat protection starts
The
distance
between
machine and the remote control
is too far
The remote control is not aligned
with the direction of the remote
control receiver
Batteries are dead
65
Solutions
Turn it on after connecting it to
a socket with electricity.
Recommended
17 to 35 ℃
range to use the machine
Change the set temperature
The machine is placed in a room
of more than 17 ℃
with an ambient temperature
Pull the curtains
Close doors and windows, and
add new air conditioning
Clean or replace the filter
screen
Clear obstructions
Put the air conditioner on a flat
and hard place (to reduce noise)
Wait for 3 minutes until the
temperature is lowered, and
then restart the machine
the
Let the remote control get close
to the air conditioner, and make
sure that it directly faces to the
direction of the receiver
Replace batteries
temperature
Publicité
