Publicité
Les langues disponibles
Les langues disponibles
90559271 PC15TCS PC15TCSM CIR SAW.qxd:??????-00 Cir Saw book
INTENDED USE
These circular saws are designed for professional wood cutting applications.
:
DO NOT use water feed attachments with this saw.
:
DO NOT use abrasive wheels or blades.
:
DO NOT use under wet conditions or in presence of flammable liquids
or gases.
ASSEMBLY/ SET-UP
Always unplug saw from power supply before any of the following
:
operations.
Never modify the power tool or any part of it. Damage or personal
:
injury could result.
ADJUSTING THE DEPTH OF CUT(FIGURE F, F1 & G)
The depth of cut should be set according to the thickness of the workpiece.
• Loosen the lever (11) to unlock the saw shoe (figures F & F1).
• Move the saw shoe (5) into the desired
position. The corresponding depth of cut
can be read from the scale (12).
• Tighten the lever to lock the saw shoe in
place.
• Set depth adjustment of saw such that one
half of a tooth of the blade projects below
the workpiece as shown in figure G.
Setting the saw at the proper cutting depth
keeps blade friction to a minimum, removes
sawdust from between the blade teeth,
results in cooler, faster sawing and reduces
the chance of kickback.
All manuals and user guides at all-guides.com
8
12/21/09
F
11
12
5
PC15TCSM
F1
5
PC15TCS
11
G
Surface of wood
8:27 AM
Page 8
12
Tip of tooth
Publicité
