Scheppach HWW1000 Traduction Des Instructions D'origine page 20

Remaining hazards
The machine has been built using modern technol-
ogy in accordance with recognized safety rules.
Some remaining hazards, however, may still exist.
• Injury through electric current if incorrect electric
connection leads are used.
• Even when all safety measures are taken, some re-
maining hazards which are not yet evident may still
be present.
• Remaining hazards can be minimized by following
the safety instructions as well as the instructions in
the chapter Authorized use and in the entire oper-
ating manual.
• Health hazard due to electrical power, with the use
of improper electrical connection cables.
• Release the handle button and switch off the ma-
chine prior to any operations.
• Avoid accidental starts of the machine: Do not press
the start button while inserting the plug into the socket.
• Use the tools recommended in this manual to obtain
the best results from your machine.
• Always keep hands away from the work area when
the machine is running.
Warning! This power tool generates an electromag-
netic field during operation. This field can impair ac-
tive or passive medical implants under certain condi-
tions. In order to prevent the risk of serious or dead-
ly injuries, we recommend that persons with medical
implants consult with their physician and the manufac-
turer of the medical implant prior to operating the pow-
er tool.
6. Technical data
Dimensions L x B x H
Mains connection
Power rating
Max. delivery rate
Particle size
Boiler contents
Max. delivery head
Max. delivery pressure
Max. suction height
Pressure and suction
connector
Max. water temperature
Protection type
20 | GB
445 x 270 x 500 mm
230V~ / 50 Hz
1000 W
4300 l/h
1 mm
19 l
44 m
4.4 bar
7 m
G1"
35°
IPX4
www.scheppach.com
Operating mode*
Weight
Subject to technical changes!
Operating mode* S1: Continuous operation at constant
load
Noise
m Warning: Noise can have serious effects on your
health. If the machine noise exceeds 85 dB, please
wear suitable hearing protection.
Noise data
Sound power level L
WA
Sound pressure level L
pA
Uncertainty K
WA/pA
7. Unpacking
Open the packaging and remove the device carefully.
Remove the packaging material as well as the pack-
aging and transport bracing (if available). Check that
the delivery is complete.
Check the device and accessory parts for transport
damage. In case of complaints the dealer must be in-
formed immediately. Subsequent complaints will not
be accepted.
If possible, store the packaging until the warranty pe-
riod has expired. Read the operating manual to make
yourself familiar with the device prior to using it.
Only use original parts for accessories as well as for
wearing and spare parts. Spare parts are available
from your specialized dealer. Specify our part numbers
as well as the type and year of construction of the de-
vice in your orders.
m ATTENTION
The device and packaging materials are not toys!
Children must not be allowed to play with plastic
bags, film and small parts! There is a risk of swal-
lowing and suffocation!
8. Attachment / Before starting the
equipment
Installation of a suction line
• Screw a suction hose (plastic hose min. 19 mm (3/4")
directly or with a threaded nipple, approx. 25.4 mm
(1"), to the suction line connection on the pump.
S1
11.7 kg
84 dB
69.36 dB
1.69 dB