Kapro PROLASER ELECTROTA GREEN Manuel D'utilisation page 18

Laser Detector
1. Press the battery compartment lock and open the battery
compartment cover.
2. Remove the 9V alkaline battery.
3. Replace with a new 9V alkaline battery.
4. Close the cover.
Remote Control
1. Slide off the battery compartment cover.
2. Remove the spent batteries.
3. Replace them with two "AAA" batteries.
4. Close the cover.
External Power Supply
The 8991G Prolaser Electrota GREEN can use an external
® ™
DC power source. This will minimize the risk of battery failure
during operation.
Use only the combined Battery Charger-AC/DC Converter
supplied with the Rotary Laser, otherwise irreparable damage
will be caused to the instrument and your warranty will be invalid.
The suitable power range of the combined Battery Charger-AC/
DC Converter is 50 - 60Hz, 100VAC-240VAC.
18