Manual Mode - Kapro PROLASER ELECTROTA GREEN Manuel D'utilisation

7. To make the beam more visible, change the rotating speed (see
page 13), change scanning mode (see page 14), or use the
Laser Detector to detect the laser beam (see page 15).
8. You can use the remote control to control the Rotary Laser (see
page 16). This option is very useful for trench work or when
laying concrete.
9. To turn the Rotary Laser off, press the On/Off button.

Manual Mode

If the Manual/Auto button is pressed and the LED indicator, next
to it, is lit then the self-leveling is disabled and the laser beam will
rotate regardless of the position of the level. The level can be set as
required and used to mark the line at any angle.
11