reMoViNG AND repLAciNG tHe StorAGe DrAWer
(MoDeL NX58H5600S*, NX58J5600S*, NX58M5600S*)
to remove the storage drawer
1. Pull out the drawer and remove any stored content.
2. While supporting the drawer, pull it out until the
top of the drawer sides come out of the two nylon
drawer guides. Then, lift to remove the drawer.
3. Clean the drawer in warm, soapy water. Rinse and
dry thoroughly.
to replace the storage drawer
1. Place the top of both drawer sides in the openings on
the two nylon drawer guides and push in enough to
support the drawer.
2. Replace any stored content and push in the drawer
while slightly lifting the front to close it.
WEB_NX58H5 Series_AA_DG68-01006A-00_EN+MES+CFR.indb 71
maintaining your appliance _71
2017-08-24
11:43:41