Samsung NX58H5600S Serie Mode D'emploi page 44

6. Press the Delay Start pad.
The display will show Delay, and -- -- will blink.
7. Press the number pads to enter the time you want the
oven to turn on (for example, 4, 3, 0).
The Start indicator will blink under Delay and the
selected start time.
8. Press the START/SET pad.
The oven will automatically turn on and beep when the
set start time is reached.
The oven will automatically light and start preheating.
When the oven reaches the desired cooking
temperature, it will beep 6 times.
The display will count down the set cooking time.
When the cooking time has elapsed, the oven will
automatically shut off and the display will show the time
of day.
to change a programmed starting time, press the Delay Start pad, enter
the new starting time, and then press the START/SET pad. The oven will start
cooking at the new start time.
to change a programmed baking temperature, press the Bake pad, enter
the new baking temperature, and then press the START/SET pad. If the oven
temperature is above the new setting, the oven will beep 6 times, then show the
new setting. The oven will complete cooking at the new temperature.
to change a programmed cooking time, press the Cooking Time pad,
enter the new cooking time, and then press the START/SET pad. The oven will
continue cooking for the remaining new set time.
Place food in the oven after preheating if the recipe calls for it. Preheating is
important for good baking results. After the oven has reached the desired
cooking temperature, it will beep 6 times.
44_ operating the oven
WEB_NX58H5 Series_AA_DG68-01006A-00_EN+MES+CFR.indb 44 2017-08-24 11:43:31