Intimus 240 Crusher Instructions D'opération page 5

GB
FRONT PANEL DESCRIPTION
1 = Power Switch
Applies power to the crusher.
2 = Destroy Button
Initiates the destruction function.
Note: When pressed initially with the wedge
in the home position and in Auto Mode, the
crusher will first Auto-size requiring a second
push of the "Destroy" button.
3 = Size Button
Toggles between Auto-Mode and Manual
Mode when held down for three seconds or
when Green, Yellow and Blue lights flash in
a chasing sequence. In Auto Mode, initia-
tes the Auto-Size function. In Manual Mode
each button press moves the destruction
wedge down one of four sections.
4 = Blue Lamp
Illuminates when the wedge is moving down
during Destruction function.
5 = Yellow Lamp – Auto Mode
Solid – Indicates Auto-Size function is
running.
Flashing – Door is open and no media
detected.
Yellow Lamp – Manual Mode
Solid – Indicates destruction wedge is
moving to new position.
6 = Green Lamp – Auto Mode
Solid – Indicates ready, the door is
closed, media is detected.
Flashing – Indicates the door is open and
media is detected.
Green Lamp – Manual Mode
Solid – Indicates ready, the door is
closed.
Flashing – Indicates the door is open.
7 = Front Door
Prevents access to the HDD and Destruc-
tion wedge during the destruction process.
If opened during the destruction process the
destruction wedge will automatically stop.
Power Supply:
Power Consumption:
Cycle Time Full Cycle:
Cycle Time Destroy Cycle:
Capacity:
Operating Environment:
Physical Weight Crusher:
Physical Weight Case:
Shipping Weight:
Physical Dimensions Crusher:
Physical Dimensions Case:
Shipping Dimensions:
Warranty:
Duty Cycle:
* Ambient temperatures above 75 degrees F will have an effect on duty cycle.
94919 2 07/18
FUNCTION DESCRIPTION
6 5 4
2 3
7
TECHNICAL DATA
220-240V/50 or 60 Hz
Please check the power configuration label located on the back of the crusher.
ca. 5 A / 230V
20 seconds
10 seconds
2.5" and 3.5" hard Drives.
Disk drives up to 1.66" high.
Two 1" high standard hard disk drives.
Up to six laptop hard disk drives.
5°C - 40°C (41°F - 104°F),
Humidity: 10 to 80% (Non Condensing)
Net 37.25 kg (82 lbs.)
10.45 kg (23 lbs.)
56.8 kg (125 lbs.)
400 mm (15.75 in.) (L) x 180 mm (7.1 in.) (W) x 358 mm (14.1 in.) (H)
533 mm (21 in.) (L) x 635 mm (25 in.) (W) x 305 mm (12 in.) (H)
863 mm (34 in.) (L) x 660 mm (26 in.) (W) x 457 mm (18 in.) (H)
2 Years Factory Warranty Standard
Continuous*
5
8
1
11
000235
INSIDE COMPONENT DESCRIPTION
8 = Door Handle (Door)
Prevents access to the hard drives and
Destruction Wedge during the destruction
process. If opened during the destruction
process the destruction wedge will automa-
tically stop. When the door is closed, the de-
struction wedge will retract.
9 = Destruction Wedge
The Destruction Wedge pushes down on
the hard drive(s) bending and breaking the
external and internal components, rendering
the hard drive inoperable.
10 = Hard Drives
Hard drives are centered between the two
Support Rails.
11 = Support Rails
Supports and aligns the hard drive(s).
12 = Debris Tray
Removable tray helps collect hard drive
debris caused by the destruction process.
The Debris Tray can be easily lifted out and
000233
emptied.
240 Crusher
9
10
11
12
000236