Publicité
Les langues disponibles
Les langues disponibles
ASSEMBLY INSTRUCTIONS.-
Take the unit out of the box and place
it on the floor as shown in Fig.1.
The assistance of a second person
is advisable for the assembly work.
Make sure that all of the pieces are
there:
(A) Main body; (C-L) Left pedal (C-R)
Right pedal; (B) Stabiliser bar; (B1)
Rear stabiliser bar; (D) Screw M-4x25;
(E)
Grower
combination spanner.
1.- FITTING THE
STABILISERS.-
Take the stabilser (B) marked with the
letter (A) and place it at the front of the
unit marked with the letter (A), as
shoewn in Fig.2, insert the M-4x25
screws (D).
Next, take the rear stabiliser (B1)
marked with the letter (B), Fig.3, and
go through the same fitting procedure
as with the front stabiliser.
2 ATTACHING THE PEDALS.-
Right and left refer to the position that
the user adopts when to do the
exercises.
Insert the right-hand pedal (C-R),
marked with the letter (R), onto the right-
hand crank, also marked with an (R).
Next, Fig.4.
Insert the left-hand pedal (C-L), marked
with the letter (L), onto the left-hand
crank, also marked with an (L), Fig.4.
MAINS CONNECTION.-
Connect the unit to a plug provided of
a ground (220v). Put the switch (L) in
position [1] Fig.6.
washer
M-4;
REMOTE CONTROL.-
Pedal
11
Display indicator: Speed,
Time. Distance (Distance
traveled km) Calorie, Scan (The
random sample data display
speed, time, distance, calories).
1:
Power
2:
Time-Time selection
button. (1-15 min).
3:
Speed-- Select key for
increasing speed (12 speed
levels).
4:
Speed+- Select key for
increasing speed (12 speed
levels).
5:
Forward/reverse-
Change pedal direction key
6:
Mode-Select key for
parameter display speed, time,
distance, calories
Publicité
