Publicité
Les langues disponibles
Les langues disponibles
Product Description Mechanical Modules
SAFEMASTER STS (FRP) consists of modules that can be individually combined and adapted to your application. The modularity makes it possible
to build several units into one system or to adapt and/or extend existing systems as required. Purely mechanical locking units can be integrated
wirelessly into the machine and system concept and thus ensure economical and reliable protection in extensive applications.
Safety Category
Up to
Cat. 4 / PL e
SIL 3
Mechanically Coded Actuators
Actuator J With Self-Adjustment
Actuator CS
Double Actuators
SAFEMASTER STS/K systems can
be used as individual solutions in
applications up to category 4,
Performance Level e according to
EN ISO 13849-1 can be used.
All actuators belonging to the
SAFEMASTER STS/K system are
also available in the coding level
medium, according to
EN ISO 14119:2013.
When plugged in, the J actuator
is self-adjusting over 4 degrees
of freedom and retains its last
alignment state.
It can have an offset of up to
20 mm to compensate.
The CS actuator is particularly
suitable for harsh and dirty ambient
conditions. In addition, the CS
actuator is designed for applications
with high shear and tensile forces,
so that overload breaks can be
largely excluded.
For applications with Performance
Level e, SAFEMASTER STS/K
units can also be equipped with 2
actuators.
EC Type Tested
Actuator C With Angle Compensation
CW Bolt Actuator
Actuator Locking Force
Monitoring Of 2 Doors With One Unit
15
SAFEMASTER STS/K systems are
logic units for safety functions
according to Annex IV, S21 and are
EC type tested in accordance with
legal requirements.
The C actuator with adjustable
actuator angle is spring-mounted.
It returns to its set state after a load.
The CW bolt moves under the
mounted unit, making the slider
suitable for securing hinged doors
with both left and right stop.
It is designed in such a way that
shear forces cannot act directly
on the STS/K unit. It is particularly
suitable for applications, where high
forces can act on the STS units, e.g.
in double swing doors.
The holding force F
according to
zh
EN ISO 14119:2013 is 2000 N.
(stainless steel versions 4000 N)
SAFEMASTER STS/K units with
double actuators can be used to
monitor 2 adjacent accesses.
SAFEMASTER STS/K-M12M/K / 11.01.21 en / 335A
Publicité
