Garland 1052 ZG Manuel De L'utilisateur page 39

5.2.2. ASSEMBLING THE WHEELS
2. Assemble the two wheels (39) to the main body of
the machine using the wheel axle (48). Then secure
them with the flat washer (29) and the nut (37).
5.2.3. ASSEMBLY OF THE BLADE GUARD AND
HYDRAULIC CYLINDER
3. Adjust the beam in a horizontal position and fix it
with the twist lock system.
4. Assemble the hydraulic cylinder (45) and blade
guard (80) to the beam using a hex bolt (21), spring
washer (9), flat washer (10) and nut (11).
5.2.4. MOUNTING THE LOG GUARD
5. Assemble the left (2) and right (14) guide using the
nuts (8), spring washer (9) and flat washer (10).
6. Attach the log guard (4) to both sides using the nuts
(5), flat washer (6) and bolt (7).
5.2.5. ENGINE BLOCK ASSEMBLY
7. Secure the engine block to the main body using
bolts (34), flat washers (35), spring washers (50) and
nuts (37). Connect the oil tube (E) to the gear pump (E)
and secure with the clamp (43).
45
39/156
English