HP Photosmart D7400 Serie Guide D'utilisation page 9

To set up the HP Photosmart on a wired
network, you need to do the following:
First, collect all of the required materials.
Next, connect to a wired network.
Finally, install the software.
What you need for a wired network
Before you connect the HP Photosmart to a network, make sure you have all of the
required materials.
❑ A functional Ethernet network that includes a router, switch, or hub with an Ethernet
port.
❑ CAT-5 Ethernet cable.
Although standard Ethernet cables look similar to standard telephone cables, they
are not interchangeable. There is a different number of wires in each one, and each
has a different connector. An Ethernet cable connector (also called an RJ-45
See this section:
"What you need for a wired network"
on page 9
"Connect the HP Photosmart to the network"
on page 10
"Install the software for a network connection"
on page 17
Wired network setup 9