Bosch DWK093650 Mode D'emploi Et Notice De Montage page 25

Installation
Connection in Recirculation Version
All the items named in this procedure are
included in the recirculation kit. The correspond-
ing accessory numbers can be found at the end
of these operating instructions.
Put connection 15 into the connection support
7.3, previously fi x with the upper bracket sup-
port chimne 7.2.1, and secure with a screw.
Insert the connection extension pieces laterally
14.1 in connection 15.
Make sure that the outlet of the extension
pieces 14.1 is horizontally and vertically aligned
with the chimney outlets.
Connect the air outlet connection 15 to the
hood body outlet using either a pipe ø 150 mm.
Use the jubilee clips 25 to ensure a fi x connec-
tion between pipe and hood outlet and between
pipe and connection (15).
Ensure that the activated charcoal fi lters have
been inserted.(see parag. "Activated carbon
fi lter" in Filters and Maintenance chapter)
7.3
15
ø 150
25
14.1
en
25