Publicité
Les langues disponibles
Les langues disponibles
en - Installation notes
Hard-water kit
(APWM062)
APWM 019/020
Connector Box
Peak load/energy
management
10
Care must be taken to drill through the first wall only (I) as there is a
deflecting wall (II) 3/8" (10 mm) behind it.
Connections 3 to 12 are provided for liquid detergent. High-pressure
dispensing systems with water injection must not be connected to
these connections. The connectors are sealed and must be cut to the
diameter of the hose with a small saw before they are connected.
If opened connectors are no longer required, they must be resealed
using a suitable sealant (e.g., silicone).
External dispenser pumps are connected and calibrated via the
Connector Box, which is available as an option.
A flowmeter or flow sensors can be connected for precise monitoring
of the dispensing quantity.
Connections for level monitoring are available for every agent dis-
pensed.
Optional accessories
Only use genuine Miele parts and accessories with this machine.
Using spare parts or accessories from other manufacturers will
void the warranty, and Miele cannot accept liability.
The hard-water connection on the washing machine can be retrofitted
with the optional hard-water kit (APWM062).
The additional water connection allows hard water to be used and
the program runtime will therefore be reduced. In addition, hard wa-
ter is particularly suitable for the final rinse cycles.
The Connector Box allows external hardware from Miele and other
suppliers to be connected to the Miele Professional Washing Ma-
chine.
Flowmeters for the water inlet can also be connected to the Connec-
tor Box (APWM 065).
A peak-load or energy management system can be connected via the
Connector Box.
Peak-load negotiation monitors the energy consumption of a system
and deactivates individual pieces of equipment temporarily in order
to ensure that certain total load limits are not exceeded. Monitoring
is externally controlled.
Publicité
