Proline PLCH207 Manuel D'utilisation page 52

Before placing food in the appliance
• Remove all packaging.
• Allow the appliance to run empty for 2 – 3 hours so the compartment can
cool to the appropriate temperature.
• Clean the inside of the appliance with warm water and a little liquid
detergent to remove manufacturing and transportation dust.
Adjusting the temperature
The appliance is controlled with a temperature
control knob located on its outside wall.
Adjust the control knob as desired to suit your
individual preference.
1. Plug the freezer in the mains socket.
• The POWER indicator light will illuminate.
2. Adjust the temperature control knob to the desired position between MIN
(cold) and MAX (coldest).
3. 0 is OFF setting – The appliance will stop working.
NOTE: When you use the appliance for the first time or after defrosting, adjust
the contro knob to the coldest setting for at least 2 hours before introducing
food to be stored, and then readjust to the middle setting.
Moving your appliance
AIf the appliance is turned off for any reason, wait for 10 minutes before turning
it back on. This will allow the refrigeration system pressures to equalise before
restarting.
• Turn off the appliance and unplug it from the mains socket. Also remove
all mobile parts (basket, accessories, etc.) or fix them into the appliance to
avoid any shock.
• Relocate and install. If the appliance has been left on its side for any length
of time, leave it standing upright for at least 10 minutes before turning on.
PLCH207 IB.indd 49 PLCH207 IB.indd 49
USING YOUR FREEZER
49
10/11/2023 2:26 PM 10/11/2023 2:26 PM