Mitsubishi Electric CITY MULTI PAR-40MAAU Manuel D'installation page 18

Display setting menu
(1) Main display setting
[Button operation]
Move the cursor to "Full/Basic," and use the F3 or F4 button to select the display mode "Full" or
"Basic." (The factory setting is "Full.")
Full mode (Example)
Note: This setting is only for the Main display. In the Basic mode, icons that indicate control status
on timer and schedule settings will not appear on the display. Vane, louver, and ventilation
settings or room temperature will not appear, either.
(2) Black and white inversion setting
Move the cursor to "B&W inversion" and use the F3 or F4 button to select
the display mode "Yes" or "No." (The factory setting is "No.")
Selecting "Yes" will invert the colors of the display, turning white
background to black and black characters to white as shown at right.
(3) Remote controller display details setting
Make the settings for the remote-controller-related items as necessary.
Press the SELECT button to save the changes.
Basic mode (Example)
– 18 –