ZANKER KBB29011SK Notice D'utilisation page 23

Replacing the lamp
The appliance is equipped with a long-
life LED interior light.
It is strongly recommended to use
original spare parts only.
Use LED bulbs (E14 base) only. The
maximum power is shown on the lamp
unit.
Caution! Disconnect the plug from the
mains socket.
1. With your fingers, spread slightly both sides of the
transparent cover to unhook them and detach the
cover pulling it in the direction of the arrows.
Technical data
Product information sheet
Trade Mark
Model
Category
Energy efficiency class
Energy consumption in kWh per year, based on standard test re-
sults for 24 hours. The actual energy consumption will depend on
how the appliance is used and where it is located
Storage volume in litres, Fridge
Storage volume in litres, Star
Storage volume in litres, Cellar zone
Storage volume in litres, Wine
Storage volume in litres, Total
1
2
1
2. Replace the lamp with the one that has identical
characteristics and is specifically designed for
household appliances.
3. Reassemble the lamp cover.
4. Connect the plug to the mains socket.
5. Open the door.
Make sure that the light switches on.
Closing the door
1. Clean the door gaskets.
2. If necessary, adjust the door. Refer to assembly
instructions.
3. If necessary, replace the defective door gaskets.
Contact the Authorised Service Centre.
Zanker
KBB29011SK 925503042
7. Refrigerator-freezer
A+
291
196
-
-
-
268
23