Olimpia splendid OS-SENEH12EI Mode D'emploi Et D'entretien page 82

3.3 - FUNCTION INDICATOR ON INDOOR UNIT DISPLAY PANEL
The display panel shows the current setting temperature
and function code enable/disable when the air conditioner
is in operation.
In "Fan" and "Dehumidification" mode, the room
temperature is displayed.
In the case of a fault, displays the error code.
3.3.1 - Function Codes
Light for 3 seconds when:
- TIMER ON is set
- SWING, TURBO or SILENCE features are enabled
Light for 3 seconds when:
- TIMER OFF is set
- SWING, TURBO, or SILENCE features are disabled
Lights up when the function that controls hot air in Heating mode is automatically activated.
Lights up when the air conditioner starts defrosting automatically.
Lights up when SEL CLEAN function is enabled
Lights up when FROST PROTECTION function is enabled
Lights up when WIRELESS function is enabled (if available in this model)
3.4 - DESCRIPTION OF REMOTE CONTROL
The remote control is the interface between the air-conditioner and the customer, so it is very important to
learn all its functions, the use of the various controls and the meaning of the symbols marked on it.
A. Transmission
This transmission indicator lights when remote controller transmits signals to the indoor unit.
B. Operating mode
Displays the operating mode active.
It includes: AUTO
C. Follow me Function
D. Temperature
Displays the required temperature (from 17°C to 30°C).
When you set the operating mode to FAN ONLY, no temperature setting is displayed.
, COOL , DRY , HEAT , FAN ONLY and return to AUTO
K
2
.
EN - 29
NEXYA S4 E