Publicité
Les langues disponibles
Les langues disponibles
INSTALLATION
•
This appliance may only be fitted by a certified installer.
• Always observe the installation instructions in the provided
installation manual.
• Check the appliance for transport damage. Do not connect a
damaged appliance.
• Defective parts may only be replaced by original parts. Only for
those parts will the manufacturer be able to guarantee that they
meet the safety requirements.
• Do not use the appliance if the plug, cord or appliance are
damaged, or if the appliance no longer functions properly or
if it is damaged in any other way. If this is the case, consult the
retailer or our maintenance service. Never replace the plug or
cord yourself.
• Always use the original cable and plug for connecting the
appliance.
• The electrical connection must meet national and local
regulations.
• The wall socket and plug should always be within reach.
• If you want to create a permanent connection, make sure an
omnipolar switch with a contact distance of at least 3 mm is
installed in the supply line.
• The appliance may not be connected to the mains supply via
a power strip or extension cord. If this is not observed, the safety of
the appliance cannot be guaranteed.
•
Warning: repairs to electric appliances should only be
performed by professional people. It is dangerous to perform
a repair whereby the base unit of the appliance must be
opened.
• Make the appliance free from voltage before starting a repair.
• In connection with possible sharp edges, we recommend
wearing work gloves when mounting the appliance.
• The distance between the lowest point of the appliance and a
gas cooker should be at least 75 cm. In the case of an electric,
ceramic or induction cooker, this distance should be at least 65
cm.
• If the manual of the cooker recommends a larger distance, this
distance should be observed.
16
•
English
Publicité
