Mitsubishi Electric PAC-YT53CRAU Manuel D'installation page 4

2 Component names and supplied parts
The following parts are included in the box.
Parts name
Remote controller (top case)
Remote controller (bottom case)
Roundhead cross slot screws M4×30
Wood screw 4.1×16
(for direct wall installation)
Installation Manual (this manual)
Instruction Book
*3 ISO metric screw thread
*4 Remote controller cable is not included.
3 Field-supplied parts/Required tools
(1) Field-supplied parts
The following parts are field-supplied parts.
Parts name
Single switch box
Thin metal conduit
Lock nut and bushing
Cable cover
Putty
Molly anchor
Remote controller cable
(Use a 0.3 mm² (AWG22) 2-core
sheathed cable.)
Switch box
16 (5/8) 16 (5/8)
54 (2-1/8)
(2) Field-supplied tools
• Flat-tip screwdriver (Width: 3 - 5 mm (1/8 - 7/32 inch))
• Knife or Nipper
• Miscellaneous tools
Qty. Appearance
1 Right figure *1
1 Right figure *2
2 *3
2 *3
1
1
Qty.
1 Not required for direct wall installation
Necessary
Necessary
Necessary Required for routing remote controller cable along a wall
Reasonable
Necessary
Necessary If you need to use a cable extension longer than 10 m (32 ft),
select an electric wire that meets the following specifications:
Wire specification VCTF or CVV (2-core):
h
6 (1/4) 20
(13/16)
1.5 (1/16) or less
10
(3/8)
44 (1-3/4)
– 4 –
Top case *1
Notes
1.25 mm² (stranded 16 AWG) or equivalent
unit: mm (in)
Bottom case *2