CLIMAVENETA MHD 30 Mode D'emploi page 36

SELECTING THE COOLING MODE
• Press the button to switch on the fan coil.
The symbol starts blinking on the display and a beep indi-
cates that the fan coil has started.
• Press the MODE button repeatedly until the cooling
symbol appears on the display.
• The temperature should now be set using the (
keys.
• To select the fan speed, just press the FAN button repeat-
edly until obtaining the required fan setting (automatic,
high, medium, low).
In the cooling mode the appliance automatically takes
excess moisture from the environment.
SELECTING THE DEHUMIDIFYING/DRY MODE
It is advisable to activate this function when humidity levels
are high.
ON/OFF
• Press the button to switch on the fan coil.
• The symbol starts blinking on the display and a beep
indicates that the fan coil has started.
• Press the MODE button repeatedly until the dehumidifying
symbol appears on the display.
• The dehumidifying level should now be set using the keys
.
• The fan speed is selected automatically by the appliance in
the dehumidifying/dry mode.
SELECTING THE FAN ONLY MODE
On sultry but not particularly hot days it could be sufficient to
activate the fan function.
ON/OFF
• Press the button to switch on the fan coil.
• The symbol starts blinking on the display and a beep
indicates that the fan coil has started.
• Press the MODE button repeatedly until the fan
appears on the display.
• Once the fan function has been activated, press the FAN
button repeatedly until obtaining the required speed (high,
medium, low).
SELECTING THE HEATING MODE
ON/OFF
• Press the button to switch on the fan coil.
The symbol starts blinking on the display and a beep
indicates that the fan coil has started.
• Press the MODE button repeatedly until the heating
symbol appears on the display.
• Once the fan function has been activated, press the FAN
button repeatedly until obtaining the required speed (high,
medium, low).
14
All manuals and user guides at all-guides.com
)
symbol