CLIMAVENETA MHD 30 Mode D'emploi page 28

INSTALLATION
LOCATING THE INDOOR UNIT
The place of installation must be established by the installa-
tion designer/services engineer or by a technically compe-
tent person and must take into account technical require-
ments as well as applicable current laws and regulations.
The fan coil must be installed by a qualified company in
accordance with applicable laws and regulations in force in
the country of installation.
The fan coils are designed for wall mounting.
Installation should allow the treated air to circulate freely
throughout the room and leave sufficient space for access to
the unit for maintenance or servicing operations.
Before starting installation, decide on the position of the
indoor, taking into account the minimum technical
spaces required.
To mount the unit on the wall:
- Fix the metal plate to the wall using the provided screw
anchors and screws.
6
All manuals and user guides at all-guides.com
UNIT INSTALLATION
MHD 30-40
MHD 50-60
Installer
Holes for
fixing screws
Hole for electric cable
conduits and condensate
drain pipe to pass through
Holes for
fixing screws
Hole for electric cable
conduits and condensate
drain pipe to pass through
4,1x32