Publicité
Les langues disponibles
Les langues disponibles
Launch Exelia Partner and connect the module to Exelia Partner following the Instructions
For Use of Exelia Partner.
1.6 Disconnection
1. Unplug the mains power adaptor
Maintenance Adaptor power inlet
2. Switch off the module.
3. Disconnect the Ethernet cable
Adaptor RJ45 connector
4. Remove the Exelia Maintenance Adaptor by pressing the blue release button
back-right corner of the module, and sliding the Exelia Maintenance Adaptor out of the
module
10
.
1.7 Cleaning, Maintenance and Storage
1.7.1 Cleaning
If cleaning is necessary, refer to the Instructions for Use of the Exelia infusion module for
the recommended cleaning agents.
9
5
from the maintenance PC and the Exelia Maintenance
6
.
4
9
4
from the mains power supply and the Exelia
8
.
5
6
8
10
9
7
9
on the
Publicité
