Télécharger Imprimer la page

NEC MultiSync FE700+ Manuel De L'utilisateur page 12

Masquer les pouces Voir aussi pour MultiSync FE700+:

Publicité

Les langues disponibles

Les langues disponibles

Specifications
Monitor
Specifications
Picture Tube
Viewable Image Size:
Input Signal
Analog input:
Display Colors
Horizontal:
Synchronization
Range
Resolutions Supported
Resolution based on horizontal and
vertical frequencies only
Horizontal:
Active Display Area
(Factory Setting)
Active Display Area
(Full Scan)
Power Supply
Current Rating
Dimensions
Weight
Environmental Considerations
Operating Temperature:
Storage Temperature:
MSFE700+.wpc
MultiSync
®
FE
Monitor
Diagonal:
17 inch
16 inch
Radius:
50,000 mm
Video:
ANALOG 0.7 Vp-p/75 Ohms
Sync:
Separate sync. TTL Level
Horizontal sync. Positive/Negative
Vertical sync. Positive/Negative
Composite sync. (Positive/Negative) (TTL Level)
Unlimited number of Colors
31 kHz to 70 kHz
Vertical:
55 Hz to 120 Hz
640 x 480 @ 60 to 120 Hz
800 x 600 @ 55 to 110 Hz
832 x 624 @ 55 to 105 Hz
1024 x 768 @ 55 to 87 Hz ....................... NEC-Mitsubishi Electronics Display cites
1152 x 870 @ 55 to 77 Hz
1280 x 1024 @ 55 to 66 Hz
315 mm/12.4 inches
Vertical:
236 mm/9.3 inches
325 mm/12.8 inches
243 mm/9.6 inches
AC 100 – 240 V, 50/60 Hz
1.5A @ 100-240 V
399 mm (W) x 413 mm (H) x 415 mm (D)
15.7 inches (W) x 16.3 inches (H) x 16.4 inches (D)
16.5 kg
36.4 lbs
+10°C to +35°C / +50°F to +90°F
Humidity:
30% to 80%
Feet:
0 to 10,000 Feet
-20°C to +60°C / -4°F to +140°F
Humidity:
10% to 90%
Feet:
0 to 45,000 Feet
NOTE: Technical specifications are subject to change without notice.
10
12
+
Notes
700
90° deflection, 0.25 mm grille pitch,
medium short persistence phosphor,
aperture grille CRT, multi-layered, anti-static
screen coating, dark-tint screen and
OptiClear
®
screen.
Depends on display card used.
Automatically
Automatically
Some systems may not support
all modes listed.
recommended resolution at 85 Hz for
optimal display performance.
Dependent upon signal timing used,
and does not include border area.
Dependent upon signal timing used,
and does not include border area.
11/22/00, 2:16 PM

Publicité

loading

Ce manuel est également adapté pour:

Multisync fe700+bkFe700+-rFe700+bk-r