Publicité
Les langues disponibles
Les langues disponibles
The rational and correct arrangement of the
dishes is an essential condition for a good
washing result.
CUTLERY BASKET
(only on some models)
The cutlery basket is intended to contain
cutlery of all kinds, excluding those of such
length as to interfere with the upper
sprinkler. The cutlery must be placed in the
appropriate spaces of the upper grids to
allow for optimal water passage. It is possible
to remove the upper grids by lifting them
and sliding them inside their seat (fig.10).
You can adjust the height of the cutlery basket
handle by pulling or pushing the handle (fig.11).
An example of the positioning of the Cutlery
rack is shown in figure 9.
WARNING:
Knives and other utensils with sharp
points must be loaded in the basket
with their points facing down or placed
in a horizontal position.
USING THE THIRD BASKET
(only on some models)
Use the third basket to load the cutlery, as
shown in the image (fig.12).
Load the knives with the cutting side facing
downwards.
If necessary, the side shelves of the third
basket can be slid or removed (fig.13-14) in
order to create additional space in the
upper basket for bulky items such as
crystals.
103
Publicité
