EUROM 332643 Manuel D'utilisation page 29

Cleaning and Maintenance
Keep the heater clean. Deposits of dust and dirt in the appliance are a common
cause of overheating so these should be removed regularly. Switch off the heater,
remove the plug from the socket and allow the heater to cool down before cleaning
or carrying out maintenance work..
 Wipe the outside of the heater regularly with a dry or slightly damp cloth. Do not
use aggressive soaps, sprays, cleaners or abrasives, waxes, polishes or chemical
solutions!
 Use a vacuum cleaner or compressor to carefully remove any dust and dirt from
the grills and ensure that the air intake and outlet openings are clean. Be careful
not to touch or damage any internal parts during cleaning!
 The heater contains no other parts which need maintenance.
 At the end of the season, store the cleaned heater in the original packaging if
possible. Store upright in a cool, dry and dust-free place.
Removal
CE-statement
Eurom - Genemuiden-NL hereby declares that the EUROM workspace heaters,
type EK3000 complies with the LVD guideline 2014/35/EU and the EMC guideline
2014/30/EU and meets the following standards:
EN 60335-1:2012+AC:2014+A11:2014 EN 55014-1:2017
EN 60335-2-30:2009+A11:2012
EN 62233:2008
Rohs 2011/65/EU&2015/863/EU
Genemuiden, 27-05-2019
W.J. Bakker, alg. dir.
In the EU this symbol indicates that this product may not be
disposed of as ordinary household waste. Old equipment
contains valuable materials, suitable for recycling. These
materials should be made suitable for reuse in order to prevent
any adverse effects to health and the environment caused by
unregulated waste collection. Therefore, please make sure that
you bring old equipment to a designated collection point.
Alternatively, contact the original supplier, who can make sure
that as many of the components as possible can be recycled.
EN 55014-2:2015
EN 61000-3-2:2014
EN 61000-3-3:2013
29