Orbegozo CP 135105 Manuel D'instructions page 13

CP 135105
14. WARNING: In case of misuse, there is a risk of
possible injury.
Other specific safeguards
1. The method of disconnection from the mains
supply must incorporate a switch or isolator with
a minimum contact separation of 3 mm.on all
poles.
2. Make sure that when the fan is fitted in the
chosen position, there is no possibility of the
rotating blades coming into contact with any
object. Blades should be at least 2.30 m from floor
when fan is hung.
3. If you are installing more than one ceiling fan
make sure that you do not mix fan blade sets,
even though they are from the same ceiling fan
model.
4. Before beginning, disconnect power by removing
fuse or turning off circuit breaker.
5. Once fan installation is completed make sure that
all connections are secure to prevent fan from
falling.
6. Fan must be turned off and stopped before
reversing fan direction.
13