Qilive Q.6598 Manuel D'utilisation page 31

Problem Possible Causes
This may be caused
Knocking by either the on-site
noise in the installation or the
water pipes. cross-section of the
piping.
The dishes were not
loaded correctly.
The program was not
powerful enough.
Not enough
detergent was
dispensed.
The dishes
are not
Items are blocking
clean.
the movement of the
spray arms.
The filter
combination is not
clean or is not fitted
correctly. This may
cause the spray
arms to be blocked.
Combination of soft
Cloudy
water and too much
glassware.
detergent.
White spots
Hard water can
appearing
cause limescale
on glasses
deposits.
and dishes.
Black or Aluminium utensils
grey marks have rubbed against
on dishes. the dishes.
Detergent
Dishes block the
still in
dispenser.
dispenser.
What to Do
This does not affect the performance of the
dishwasher. If in doubt, contact a qualified
plumber.
See Part II: Preparing and Loading Dishes.
Choose a more intensive program.
Use more detergent or change the
detergent you are using.
Rearrange the items in the dishwasher so
that the spray arms can rotate freely.
Clean and/or fit the filter correctly. Clean
the spray arm jets.
If you have soft water, use less detergent
and select a shorter cycle to wash
glassware.
Add more detergent.
Use a mild abrasive cleaner to eliminate
the marks.
Reload the dishes correctly.
31
EN