Braun 5769 Mode D'emploi page 13

The cleaning cartridge can be disposed of with regular household waste.
The hygienic cleaning cartridge contains ethanol or isopropanol (specification see
cartridge), which once opened will naturally evaporate slowly. Each cartridge, if not
used daily, should be replaced after approximately 8 weeks to ensure optimal
disinfection. The cleaning cartridge also contains lubricants for the shaving system,
which may leave residual marks on the outer foil frame and the cleaning chamber of the
C&C. These marks can be removed easily by wiping gently with a damp cloth.
Accessories
Braun recommends changing your shaver's Foil & Cutter cassette every 18 months to
maintain your shaver's maximum performance.
Available at your dealer or Braun Service Centres:
• Foil & Cutter cassette: 52S/52B
• Cleaning Cartridge: CCR
• Braun Shaver cleaner spray
Subject to change without notice.
For electric specifications, see printing on the special cord set.
Trouble-Shooting
Problem
SHAVER
Shaver does
not charge
completely and
keeps blinking.
Charging does
not start when
connected to
power socket.
Unpleasant
smell from the
shaver head.
Possible reason
Ambient temperature is
out of valid range.
1. Sometimes charging
could start delayed
(e.g. after long
storage).
2. Ambient temperature
is out of valid range.
3. Special cord set is not
plugged in properly.
1. Shaver head is cleaned
with water.
2. Cleaning cartridge is
in use for more than
8 weeks.
Remedy
Recommended ambient temperature for
charging is 5 °C to 35 °C (41 °F to 95 °F).
1. Wait a few minutes, if charging will
start automatically.
2. Recommended ambient temperature
for charging is 5 °C to 35 °C (41 °F to
95 °F).
3. Special cord set needs to snap into
place.
1. When cleaning the shaver head with
water only use hot water and from time
to time some liquid soap (without
abrasive substances). Remove
Foil & Cutter cassette to let it dry.
2. Change cleaning cartridge at least
every 8 weeks.
13