Garland HUNTER 1269 SML Manuel D'instructions page 30

English
INDEX
1. Introduction
2. Security measures
3. Warning symbols
4. Machine symbols
5. Machine description
6. Start up instructions
7. Using the machine
8. Maintenance and service
9. Trouble shooting
10. Transport
11. Storage
12. Recycling or disposal of your machine
13. Warranty conditions
Declaration of conformity CE
TRANSLATION OF THE ORIGINAL INSTRUCTIONS
Ref.:GCCHUNTER1269SMLV20M1123V2
DATE OF PUBLICATION: 29/10/2020
DATE OF REVISION: 02/11/2023
1. INTRODUCTION
30 Thank you for choosing this Garland machine. We
are confident that you will appreciate the quality and
31 performance of this machine, which will facilitate your
task for a long period of time. Remember that this
35 machine has the most extensive and expert technical
assistance network which you can consult for the
36 maintenance, troubleshooting and purchase of spare
parts or accessories.
38
Warning! Read all safety warnings and
40 all instructions. The failure to observe
all warnings and instructions below can
44 result in fire and/or serious injury. Before using this
machine, carefully read the information in this manual
47 on correct setup and safe techniques.
52 Only cut grass. Do not use this machine for other
unintended purposes. For example: do not use the
54 lawnmower to mulch, to cut hay or bushes, and do
not use it as a mill. Using the mower for things other
54 than the designed operations may result in dangerous
situations.
54
Save all warnings and instructions for future
55 reference. If sold in the future, remember to give this
manual to the new owner.
56
The expression "Switch in open position" means that
the switch is switched OFF and "Switch in closed
position" means that the switch is turned ON.
Remember that the machine operator is responsible
for the damages and accidents caused to other people
or things.
The manufacturer will not be liable in any way for
damages caused by improper or incorrect use of this
machine.
30/144