SOUNDMASTER UR2016 Mode D'emploi page 14

4. Select the wake up mode "DAB", "FM", "BUZ" (Buzzer) or "OFF". The wake up mode
"DAB" and "FM" will play the last heard radio station. If you select "OFF", the alarm is
deactivated. Press "Enter" to confirm the selection.
5. Now select the wake up mode "DAILY", "WEEKDAY", "WEEKEND", "SUN...SAT"
DAILY: wake up every day
WEEKDAY: wake up from Monday to Friday
WEEKEND: wake up only on Saturday and Sunday
SUN...SAT: wake up only on one day (SUN=Sunday, MON=Monday, TUE=Tuesday,
WED=Wednesday, THU=Thursday, FRI=Friday, SAT=Saturday)
6. Press "Enter" to confirm. Now the alarm is programmed.
If you want to program ALARM 2 follow the steps 1-6. Select at step 1 the adjustment
"ALARM 2".
5. Set Backlight
When "DISPLAY" is shown, press the "Enter" button to confirm. Now you can select
between "AUTO DIM" and "DT".
AUTO DIM
Press the "Enter" button to get into the Auto Dimmer setup. Press "
or OFF and press the button again for confirmation.
ON: The unit always dim the display after 90 seconds if no key is pressed and will be
brighter for 90 seconds again if a key is pressed.
OFF: The unit will always stay in brighter mode.
DT (Dimmer timer)
If "DT" is selected, press the "Enter" button to get into the dimmer timer (DT).
Press " " or "
ON: The DT icon will appear on display and the display will stay on brighter but will
automatic tune to dim between 23:00 – 06:00 every day. At the period, if any key press, the
display will brighter for 90 seconds.
OFF: The DT icon will disappear and the device will stay on brighter mode of the backlight.
 The default set for this function is "ON".
 When Auto Dim is set to ON, the DT (Dimmer Timer) function is automatically activated.
6. Set Automatic update time
When "UP-- TIME" is shown, press the "Enter" button to confirm. Press "
select ON or OFF and press the button again for confirmation.
ON: The unit will update the time by radio on 5:00 every day.
OFF: The function is disabled.
7. Factory reset
When "RESET" is shown, press the "Enter" button to confirm, the display will show "PRESS
OK". Press the "Enter" button again, the unit will reset and set the unit into factory default.
All settings and stored radio stations will be deleted!
After the reset, the display show "UPDATE" on the display.
8. Software version
When "VERSION" is shown, press the "Enter" button to confirm. The display will show
installed software version.
" to select ON or OFF and press the button "Enter" again for confirmation.
UR2016 / English Instruction Manual
5
" or " " to select ON
" or " " to