LENCO MC-660 Mode D'emploi page 18

Date & Time
Set Date and Time: Manual Setup or Auto Detect based on local timezone.
Set Time Format: 12 Hour or 24 Hour
Set Date Format: YYYY/MM/DD, DD/MM/YYYY, MM/DD/YYYY
Daylight Saving Time (DST): On of Off
This menu only appear while Set Date and Time with Manual Setup. While
default setting Auto Detect, this menu will be disable.

Tips: When "ON" is selected, the time will be one hour later than the
current time.

Tips: When "OFF" is selected, the time will be same as the current time. If it
was already in "Daylight Saving Time(DST)" and you choose"OFF", the time
will be deducted by one hour, that's to say, the time will be same as the
actual time.
Alarm There are 3 independent Alarms which can be set. 2 different Alarms (Alarm
1, Alarm 2) and one NAP alarm which is a countdown alarm which can be
used when doing a quick sleep.
Press the Alarm button on the remote control to enter the alarm settings
menu directly and follow the following steps.
Setting the alarm
-
-
-
-
-
-
-
-
-
ON
OFF
Press 'Alarm' button on remote control
Select Alarm 1
Select Turn On
Press the 'ok' button on the remote or press the navigation wheel on
the unit.
Press the 'ok' on the "Repeat:" option and select the how the alarm
should work.
(Everyday, once or select the required days)
Press the left arrow key on the remote or unit to return to the
previous alarm menu, then select "Time:" and press 'ok'
You now can use the up down buttons to change the highlighted
Hours then press the right arrow button once to switch to the
Minutes and use the up/down buttons to change the minutes. Press
the 'ok' button to confirm.
Select the "Sound:" and press the 'ok' button. Now you can choose
between Beep, Melody, Internet Radio, FM, DAB/DAB+,USB,CD mode.
When internet radio is selected as wake up sound, you can use one
of your favorite radio stations (which have to be stored as favorite
on the MC-460 / MC-660).
18