Publicité
Les langues disponibles
Les langues disponibles
8 Operation
8.1 Weighing
Start balance by pressing
However, you can reset the weighing scale to zero by pressing
Switch off balance using
8.2 Taring
The tare weight of any preloads can be deducted by pressing a button so that the
actual weight of the weighed material is displayed in subsequent weighings.
Put on weighing receptacles and press
(example)
Place goods to be weighed in the weighing container.
(example)
25
The balance will carry out a self-test
When the weight display shows "0.0" and the triangle symbol
above the stability display
for weighing.
the
key.
The "0.0" display disappears and the scales are switched off.
The zero display appears, and above the reset symbol
the stability symbol
triangle
appears.
The weight of the container is now internally saved.
The net weight of the goods to be weighed is displayed.
The weight of the weighing container will be displayed as a
minus number (=gross weight) after removing the weighing
container.
.
appears, the scale is ready
.
.
and the net weight symbol
WTB-N_WTB-NM-BA-e-1823
the
Publicité
