Setting The Temperature Control; Interior Light - Summit RFBW61G Mode D'emploi

On freezer models FRBW51 and FRBW52D, press and hold the
SuperFreeze key for 5 seconds.
On refrigerator models RFBW61G, RFBW64 and RFBW62D, press and
hold the Light key for 5 seconds.

Setting the Temperature Control

• You can set the temperature by pressing the UP and DOWN keys.
When you press either of the two keys for the first time, the LED
readout will show the original temperature set previously. (For freezer
models, the temperature has been preset to 0°F or -18°C. For
refrigerator models, the preset temperature is 38°F or 3°C.)
• The temperature you are setting will increase by one degree each
time you press the UP key, and will decrease by one degree each
time you press the DOWN key.
• The range of the temperature control for freezer models is -11°F to
11°F; for refrigerators, the range is 36°F to 43°F.
• To view the set temperature at any time, press the UP or DOWN key.
The set temperature will flash in the display window for 5 seconds.
After 5 seconds, the temperature inside the unit will reappear in the
display window.

Interior Light

If the lower cabinet control panel has a Light key
can be turned on and off by pushing this key. If there is no Light key, an
interior LED light will turn ON automatically when the door is opened.
NOTE:
•
If the unit is unplugged, or power is lost or turned off, you must wait 3
to 5 minutes before restarting the unit. If you attempt to restart before
this time delay, the unit will not start.
•
When you use the unit for the first time or restart the unit after it has
been shut off for a long time, there could be a few degrees variance
between the temperature you select and the one indicated on the
LED readout. This is normal and is due to the length of the activation
time. There should not be a problem once the unit has been running
for a few hours.
7
, the interior light