Operation; Operating Conditions; Control Elements; Setting The Temperature - Summit FF68CSS Manuel Du Propriétaire

Modèles pour l'extérieur. réfrigérateur et cabinet-cellier et centre de boissons
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Operating conditions

Proper operation of the appliance is
guaranteed only if the following conditions
are met:
 The temperature in the room where the
appliance is located conforms to the
climate class stated on the appliance's
rating label.
 Maximum ambient relative humidity:
RH75%.
 The appliance must be placed at a
sufficient distance from heat sources ( e.g.,
ovens, central heating, direct sunlight,
etc.).
 The appliance must be located in such a
place that it is protected against the
effects of weather.
 Regular maintenance is performed
according to the instructions in this user's
manual.
 The ventilation openings in the cover of
the appliance must not be covered by
anything.
 Correct installation (e.g., leveling, the
capacity of the system corresponds to the
specifications on the rating label of the
appliance).

Control elements

For Models : FF68CSS/SWBV24SS
1) "
" button
To turn the unit ON and OFF, press and hold
this button for approximately 3 seconds.

Operation

2) "
" button
Energy conservation button: Pressing this
button for 3 seconds will turn the energy
conservation mode on or off. In this mode, the
LED light and display will turn off, and the
°C/°F light will be on.
3) "
"
Shows that the compressor is in operation.
4) "°C/°F"
The temperature scale is changed by
pressing the
5) "
"
Used to increase (warm) the temperature in
steps of 1°F (or 1°C).
6) "
" button
Used to decrease (cool) the temperature in
steps of 1°F (or 1°C).
"°C/°F"
7)
Press this button to switch the indicator light
between °C and °F.
LED display
8)
Shows the temperature of the internal cabinet

Setting the temperature

Insert the power plug into a properly grounded
power socket.
Use the
temperature of the appliance. Each time the
/
will increase / decrease by 1°F (or 1°C).
FF68CSS
You can set the temperature in the range of
36°F to 50°F (or 2°C to 10°C).
SWBV24SS
You can set the temperature in the range of
39°F to 64°F (or 4°C to 18°C).
9
indicator light
indicator light
°C/°F
button.
button
button
/
buttons to set the desired
buttons are pressed, the temperature
.

Publicité

Chapitres

Table des Matières
loading

Ce manuel est également adapté pour:

Swbv24ss

Table des Matières