Turning Off The Warming Cabinet; Reducing The Set Point Temperature - Summit RFBW61G Mode D'emploi

The LED display on the control panel normally shows the warming cabinet
temperature.
When the cabinet reaches 140°F, the heating element will turn off (the red
light goes out), then turns on again when the cabinet temperature drops to
135°F. This condition will continue until the equipment is turned off
intentionally or:
• The fan motor fails, in which case the safety switch shuts down the
heating element and the red light turns off. An electrician should be
called for service.
• Some internal or external factor is causing the current to exceed 15
amperes, in which case the circuit breaker will trip off.

Turning Off the Warming Cabinet

To turn off the appliance, switch the circuit breaker on the control panel to
OFF.

Reducing the Set Point Temperature

The operating temperature is factory-set to 140°F, but you can reduce this
"Set Point" by following this procedure:
1. Turn on the power by switching the circuit breaker on the control panel
to ON.
2. Press and release the SET button.
3. Press either the UP or DOWN arrow on the control panel to reach the
desired temperature (Set Point).
4. Press SET again to complete the process.
9