Chauvet DJ SlimPAR T6BT Guide De Référence Rapide page 3

EN
Contact
Outside the U.S., U.K., Ireland, Benelux, France, Germany, or Mexico, contact your distributor to request support or
return a product. Visit Contact Us
What is Included
• SlimPAR T6BT
• Power cord
To Begin
Unpack your SlimPAR T6BT and make sure you have received all parts in good condition. If the box or contents appear
damaged, notify the carrier immediately, not Chauvet.
AC Power
This product has an auto-ranging power supply that works with an input voltage range of 100 to 240 VAC, 50/60 Hz.
To eliminate wear and improve its lifespan, during periods of non-use completely disconnect the
product from power via breaker or by unplugging it.
Power linking
For the maximum number of SlimPAR T6BT products that you can power link at each voltage, see the User Manual or the
specification sticker on the product.
Fuse replacement
1. Disconnect the product from power.
2. Wedge the tip of a flathead screwdriver into the slot of the fuse holder.
3. Pry the safety cap out of the housing.
4. Remove the blown fuse from the clip on the front of the safety cap and replace with a fuse of the exact same
type and rating.
5. Re-insert the fuse holder and reconnect power.
Mounting
Before mounting this product, read the
Mounting diagram
Overhead Mounting
Mounting clamp
(such as CLP-15 from Chauvet)
Safety cable
(such as CH-05 from Chauvet)
2
QUICK REFERENCE GUIDE
for contact information.
• Quick Reference Guide
Safety Notes.
Mounting brackets
Floor Mounting
SlimPAR T6BT QRG Rev. 1