Publicité
Les langues disponibles
Les langues disponibles
Using your Induction Hob
To start cooking
1. Touch the ON/OFF key（A） for 3 seconds.
After power on, the buzzer beeps once; all displays show " - "
to indicate that the induction hob has entered standby mode.
2. Place a suitable pan on the cooking zone that you
wish to use.
• Make sure the bottom of the pan and the surface of the
cooking zone are clean and dry.
3. Adjust heat setting by touching the slider control (E) for the heating zone where the pan
is placed.
• If you do not choose a heat setting within 20 seconds, the induction hob will
automatically switch off. In this case, you will need to start again at step 1.
• You can modify the heat setting at any time during cooking.
If the display flashes
This means that:
• you have not placed a pan on the correct cooking zone or,
• the pan you are using is not suitable for induction cooking or,
alternately with the heat setting
11
Publicité
