Publicité
Les langues disponibles
Les langues disponibles
The blade will continue to rotate for a few seconds after the
engine has stopped. Disconnect the spark plug cap if the
lawnmower is to be left unattended.
With the starter handle in its support,
take the starter handle with your right
hand and pull slowly as far as to have
a resistance, then pull energetically
on the starter handle with starter rope
through the support. (If the cold start
is not sufficient enough, repeat this
operation 2 or 3 times)
Operation The Controls For
Mowing
Blade is in action as soon as engine started. While the machine is working maintain the
security handle in working position. The engine will stop as soon as you release the
engine control bar.
Release the lever to stop the engine whenever you need to leave the mower.
Clutch Lever
Push the clutch lever forward and hold it against the handlebar to propel the mower
forward.
Release the clutch lever to stop the mower's forward movement.
Always release the clutch lever before starting the engine. If the clutch is engaged, the
mower will move forward.
Operate the clutch lever with a quick and complete motion, so the clutch is either fully
engaged or fully released. Hold the clutch lever against the handlebar during
self-propelled mowing. This will help to extend the service life of the clutch mechanism.
80
Publicité
