B+C= Select speed 2 (in case of medium amount of steam
and smoke).
B+D= Select speed 3 (in case of a lot of steam and
smoke).
4. MAINTENANCE WARNINGS
• Cleaning: For cleaning, simply use a cloth moistened
with neutral liquid detergents. Do not use cleaning tools or
instruments.
• Avoid the use of abrasive products. DO NOT USE
ALCOHOL!
For product maintenance, see the images at the end
of the installation marked by this symbol.
•
Anti-Grease Filter: The metallic anti-grease filter
must be cleaned once a month with non-aggressive de-
tergents, manually or in a dishwasher on a short wash at
low temperatures. To remove the anti-grease filter, pull
the spring release handle.
• The Anti-Grease Filter traps the grease particles
produced during cooking. When cleaned in the dishwasher,
the metal grease filter may discolour, but its filtering
characteristics remain unchanged.
•
Carbon filter (for filter version only): The cart-
ridge must be replaced at least every four months. It
CANNOT be washed or regenerated. As indicated in the
drawings section: remove the anti-grease filters, apply a
carbon filter on each side and attach it to the product. Put
the anti-grease filters back in place.
• The carbon filter retains any unpleasant odours produced
during cooking. • The saturation of the carbon filter can
occur after somewhat prolonged use depending on the type
of cooking and how regularly the grease filter is cleaned.
•
Washable activated carbon filter (for filter
version only):
The carbon filter can be washed every two months (or
when indicated by the filter saturation system - if included
in your model). As indicated in the drawing section: remove
the grease filter, remove the carbon filter and wash using
hot water and suitable detergents or in a dishwasher at
65°C (if washing in a dishwasher, carry out the complete
washing cycle without dishes inside). Remove any excess
water without damaging the filter, then place it in the oven
for 10 minutes at 100°C to dry it out completely. Put the
anti-grease filters back in place.
Replace the foam layer every 3 years and each time the
cloth appears damaged.
Illumination
• The lighting system is based on LED technology. LEDs
provide optimal illumination, last up to 10 times longer than
conventional lamps and save 90% of electricity.
• Lighting system : The lighting system cannot be re-
placed by the user, contact Customer Service in case of
malfunction.
7