ENERGY SAVING TIPS
Install the appliance in a dry, well ventilated
room far away from any heat source (eg. radiator,
cooker, etc.) and in a place not exposed directly
to the sun. If required, use an insulating plate.
To guarantee adequate ventilation follow
installation instructions.
Insu cient ventilation at the back of the product
increases energy consumption and decreases
cooling e ciency.
Frequent door opening might cause an increase
in energy consumption.
The internal temperature of the appliance and
the energy consumption may be a ected also by
the ambient temperature, as well as location of
the appliance. Temperature setting should take
into consideration these factors. Reduce door
opening to minimum.
You can increase storage capacity of frozen food
by removing baskets and, if present, Stop Frost
shelf.
Do not worry about noises coming from the
compressor which are normal operation noises.
Keep the product away from heat sources.
Fast Freeze (if present) can be used for optimum
appliance performance, 24 hours before placing
fresh food in the freezer. Please follow the
instructions contained in the Quick Start Guide
to activate/deactivate the function.
After placing fresh food in the freezer, 24 hours
on Fast Freeze function is generally su cient; at
the end of this period, switch o the Fast Freeze
button (if provided). For appliances without
this button, turn the thermostat to its original
position.
Attention:
In order to save energy, when freezing small
amounts of food, the fast freeze function can be
deactivated after a few hours.
The user shall maintenance the refrigerating
appliance in according to CLEANING AND
MAINTENANCE chapter
EN - 57