Publicité
Les langues disponibles
Les langues disponibles
8. Hold the COUNTERWEIGHT stationary with one hand and rotate only the stylus-pressure ring
(3) bring the number "0" of the ring into alignment with the center line on the tonearm rear
shaft.
9. Rotate the COUNTERWEIGHT counterclockwise until the scale value corresponding to the
recommended stylus pressure.
Note: The recommended stylus pressure of the optional cartridge that may have been
included with your unit is 2,5 to 3 grams. For all other cartridge systems please refer to the
manufactures specification included with the cartridge.
Anti-Skate:
The anti-skate adjustment prevents the TONEARM ASSEMBLY from skipping across the record
from the centrifugal force that is caused spinning rotation of the PLATTER. The ANTI-SKATING
control knob should be set to the same value as the stylus pressure. For example if your
COUNTERWEIGHT is set to 2.5 grams the ANTI-SKATE value should also be set to 2.5.
Product Service:
1.
Clean the stylus periodically with a soft brush to prevent the accumulation of dust.
2.
When sound becomes distorted or noisy, check the stylus. If the stylus is worn out, replace it
with a new one.
3.
From time to time, the dust cover and turntable cabinet should be wiped down with a soft,
dry cloth.
4.
Volatile materials should not be used, such as: alcohol, thinner, benzine etc. They may
remove the paint or damage the luster.
Audacity software overview
Audacity is free software, licensed under the GNU General Public License (GPL). More
information
as
well
https://www.audacityteam.org/download/
*
Please ensure you have installed the software before starting.
Setting up your PC to work with Audacity
1. Connect the provided USB cable to the turntable.
2. Connect the left USB plug of this USB cable to your pc.
3. Install the Audacity recording software.
4. Open the Audacity program.
5.
Select Preference from the Edit tab in the Audacity Menu.
as
open
source
12
code
can
be
found
on
the
web
at
Publicité
