Brandt BPI184HUB Manuel D'instruction page 33

USE USE
SWITCHING ON - STOPPING
Switching on:
Press the button and then the
responding to the desired zone.
A 0 is displayed and a beep indicates that the zone
is on. You can set the desired power of the selec-
ted cooking zone. If no power is requested, the
cooking zone will be switched off automatically.
Stopping a zone:
Press and hold the
source.
A long beep sounds and the display goes out or
the "H" symbol (residual heat) appears.
General shutdown:
Press and hold the
beep sounds and the display goes out or the
symbol "H" (residual heat) appears.
+ / - Power setting
When switching on, you can switch directly to
power 9 (*or 14 depending on model) by pressing
the - button.
Press the + or - button to set the power level from
1 to 9 (*or 14 depending on model).
Press the button to access power 6.
Press the button to access power 6 or 10
(depending on the model).
button cor-
button for the desired heat
on/off button . A long
Press to access the maximum power.
HORIZONE
Pressing the button simultaneously activates
the front and rear fireboxes of the "Horizone"
function, the symbol is displayed. The power
and timer settings are made on the rear heater
controls, as for a normal heater. The front fire-
place setting is inactive.
To deactivate the "Horizone" function, press the
or button.
Setting the timer
Each cooking zone has a dedicated timer that can
be set for up to 99 minutes. The timer is incre-
mented from 1 to 15 and then from 5 to 99 and
can be started as soon as the cooking zone is in
operation.
Press the - or + button of the selected cooking
zone.
The setting is made by pressing + or - . The 99
minutes can be accessed directly by pressing the
- key from the start.
At the end of the cooking time, the display shows
0 and a beep sounds for about 20 seconds. To
deactivate the timer, press any of the control keys
of the relevant cooking zone.
To stop the timer manually, press and hold the
+ and - keys simultaneously or return to 0 with
the - key.
EN
13