Brandt BPI184HUB Manuel D'instruction page 34

USE USE
Boil Function
This function allows you to boil and maintain the
boiling of water for cooking pasta for example.
Select your cooker and press the "Boil" button
.
By default, the quantity of water proposed is 2
litres but you can modify it using the + or - buttons.
Set the desired quantity of water (from 0.5 to 6
litres).
.
Confirm by pressing the "Boil" symbol
a few seconds and the confirmation will be
automatic.
The cooking process starts.
A beep will sound when the water is boiling and
"Boil" will appear on the display.
Pour in the pasta and confirm by pressing the
"Boil" button
By default, for hobs with 14 power settings, the
display suggests power 13 (21cm & Horizon hobs)
or 12 (16cm & 18cm hobs) and a cooking time of
8 minutes.
By default, for hobs with 9 power settings, the
display suggests power 8 and a cooking time of
8 minutes.
However, you can adjust the proposed power and
cooking time.
A beep will sound at the end of the cooking time.
NOTE: It is important that the water is at room
temperature when you start cooking. Do not use a
cast iron pan for this function.
You can also use this function to cook any food
that needs to be cooked in boiling water.
Recall Function
This function displays the last power and timer
settings of all burners that have been switched off
for less than 3 minutes.
When the hob is in operation, the function recalls
the power and timer settings of the hob(s) that
have been switched off for less than 30 seconds.
14
.
To use this function, the hob must be unlocked,
press the On/Off button, then press the
button briefly.
Tempo Function*
* Depending on the model
This function displays the time elapsed since the
last power change on a selected heater.
To use this function :
- Press the button. The elapsed time flashes in
the timer display of the selected hotplate (This
function is available with or without the timer
function).
or wait
- If you want your cooking to end within a certain
time, press the key and then, within 5 seconds,
press + on the timer to increment the cooking
time you want. The time display becomes fixed
for 3 seconds and then the remaining cooking time
display reappears. A beep will be heard to confirm
your choice.
Note: If the timer is active, wait 5 seconds after
the last Tempo setting before changing it.
EN