Télécharger Imprimer la page

peerless-AV SA761PU Installation Et Assemblage page 8

Masquer les pouces Voir aussi pour SA761PU:

Publicité

Les langues disponibles

Les langues disponibles

Installing Adapter Brackets to Screen
NOTE: If screen has a VESA 400 horizontal
mounting pattern, skip to step 3-3 or 3-4 on page
10.
NOTE: For VESA 200x200 or VESA 200x100
mount hole patterns, skip to step 4 on page 11.
NOTE: For dedicated PLP plate installation skip to
step 5 on page 13.
Remove four 1/4-20 x .6" screws using 5 mm allen
3
wrench (I) and loosen two 1/4-20 x 1.25" screws
1/2 turn to allow for screen bracket adjustment.
To prevent scratching the screen, set a cloth on a fl at, level surface that will support the weight of the screen.
3-1
Place screen face side down and refer to screen manufacturers instructions for removing obstructions from the
back of the screen. Adjust screen brackets to align with screen mounting holes.
Measure horizontal mounting hole pattern and choose fi xed stop-position from chart below.
horizontal mounting hole pattern
10-3/4" - 16-1/16" (273 - 408 mm)
15-1/16" - 21-9/16" (383 - 548 mm)
20-7/16" - 27-9/16" (519 - 700 mm)
fixed stop-position
#1
#2
#3
FIXED STOP-POSTION #1
8 of 66
1/4-20 x .6" SCREWS
FIXED STOP-POSTION #3
FIXED STOP-POSTION #2
ISSUED: 10-30-09 SHEET #: 095-9298-7 01-15-11
1/4-20 x 1.25" SCREWS

Publicité

loading

Ce manuel est également adapté pour:

Sa763pu