Publicité
Les langues disponibles
Les langues disponibles
EN
Problem
The machine
does not start.
The motor runs,
but the chain
does not cut cor-
rectly, or the mo-
tor stops after
around 3 sec-
onds.
8
TECHNICAL DATA
Voltage
Possible cause
Solution
Pull the chain
brake in the di-
The chain brake
rection of the
is engaged.
user to disen-
gage it.
Make sure that
The machine
the battery re-
and battery are
lease button
not connected
clicks when you
correctly.
install the battery
pack.
The battery level
Charge the bat-
is low.
tery pack.
1. Push the
lock-out but-
The lock out but-
ton and hold
ton and the trig-
it.
ger are not push-
ed at the same
2. Push the trig-
time.
ger to start
the machine.
The battery is
Refer to battery
too hot or too
and charger
cold.
manual.
Release the trig-
The machine is
ger and start the
in the protection
machine again.
mode to protect
Do not force the
the PCB.
machine to cut.
Charge the bat-
tery. Refer to the
The battery is
battery and
not charged.
charger manual
for correct charg-
ing procedures.
Lubricate the
chain to de-
crease the fric-
tion. Do not let
The chain is not
the guide bar
lubricated.
and the chain
operate without
sufficient lubri-
cant.
Cool the battery
Incorrect battery
pack until it de-
storage tempera-
creases to the
ture
ambient temper-
ature.
40 V DC
English
No load speed
Guide bar length
Chain stop
Chain oil capacity
Weight (without battery
pack)
Measured sound pres-
sure level
Measured sound power
level
Guaranteed sound power
level
Vibration
Chain
Guide bar
9
WARRANTY
(The full warranty terms and conditions can be found on
Greenworks webpage)
The Greenworks warranty is 3 years on the product,
and 2 years on batteries (consumer/private usage) from
the date of purchase. This warranty covers
manufacturing faults. A faulty product under warranty
might be either repaired or replaced. A unit that has
been misused or used in other ways then described in
the owner's manual might be rejected for warranty.
Normal wear, and wear parts are not considered as
warranty. The original manufacturer warranty is not
affected by any additional warranty offered by a dealer
or retailer.
A faulty product must be returned to the point of
purchase in order to claim for warranty, together with
the proof of purchase (receipt).
10
EC DECLARATION OF
CONFORMITY
Name and address of the manufacturer:
Name:
Address:
Name and address of the person authorised to compile
the technical file:
Name:
Address:
Herewith we declare that the product
10
12 m/s
350 mm
< 0.15 s
180 ml
3.5 kg
L
= 96dB(A), K
pA
dB(A)
L
= 102.1dB(A)
wA
L
= 106 dB(A)
wA.d
2
3.2 m/s
, K = 1.5 m/s
CL14352
M1431452- 1041TL
Changzhou Globe Co., Ltd.
No. 65 (3-4) Xinggang Rd., Zhonglou
Zone, Changzhou 213101 China.
Peter Söderström
Propellergatan 1, 211 15 Mal-
mö, Sweden
= 3
pA
2
Publicité
