Installation Instructions
DOOR REVERSAL
INSTRUCTIONS
5
Move the door bushing (shown on the right in Figure 5) to the left, and the
plastic hole cover (shown on the left in Figure 5) to the right.
6
Move the door stopper located on the right side of the door to the left side as
shown in Figure 6. If your unit has 2 pre-installed door stops, one on each side,
this step is not necessary. Install the door onto the lower hinge located on the left
side.
7
Install the upper hinge and hinge cover on the left side. Place the plas-
tic hole covers in the holes on the right side of the top of the refrigerator.
Features
1
THERMOSTAT DIAL: For controlling the temperature
inside the refrigerator; the compressor activates as
soon as the temperature rises above the desired level.
2
REFRIGERATOR SHELF
3
LEVELING LEGS: Adjust so the unit is leveled
on the surface.
4
DOOR SHELF
CANSTOR TM DOOR LINER: Holds 355ml cans of pop,
5
juice, or beer.
6
BOTTLE RACKS: For tall, small and medium cans or
jars.
All manuals and user guides at all-guides.com
6
Figure 5
Figure 6
Figure 7