Collomix Xo 33 duo Manuel D'instructions D'origine page 8

EN
Technical data
Rated power/Current consumption:
Power supply:
Frequency:
No-load speed, first gear
Rpm under load, first gear
Mixing tool 10 - 50liters:
Weight w/o mixing tool:
Protection class:
Machine components
1 Release button for ON/OFF switch
2 ON/OFF switch
3 Handle frame
4 Handle
5 Holes for machine mounting
6 Ventilation slits
7 Mixing shaft
8 Mixing shaft marking
9 HEXAFIX coupling
10 Mixing tool
11 Protective caps
Noise/vibration levels
Measured values determined in accordance with
EN 60745. The A-weighted noise level of the
machine is typically:
Sound pressure level
L [dB(A)]
pA
Xo 33 duo 82 dB(a)
Uncertainty K = 3 dB
Overall vibration level (for mixing of mineral
materials)
Emission level a
Xo 33 duo
Uncertainty K = 1,5 m/s
Xo 33 duo_BA 24spr_Rev1.indd 8
Xo 33 duo
1150 W
230-240 V
50/60 Hz
- 500 min
- 370 min
MKD 120 HF
6,3 kg
q / II
Sound power level
L [dB(A)]
WA
93 dB(A)
[m/s ]
2
n
1,6 m/s
2
2
-1
-1

WARNING:
The measured values which are provided apply to
new machines. Noise and vibration levels change
with day-to-day use.

NOTE
The vibration level given in these instructions was
measured in accordance with a standardized method
of measurement as defined in EN 60745 and can be
used for the purposes of comparing electrical tools
with each other. It is also suitable for a preliminary
estimation of vibration strain. The vibration level
which is given represents vibration level for the
primary use of the electrical tool. If, however, the
electrical tool is used for any other purposes,
with different plug-in tools or with insufficient
maintenance, the vibration level may vary. This can
result in a significantly higher level of vibration strain
over the work period as a whole.
For a precise estimation of the vibration strain the
times when the machine is switched off have to be
taken into account as well, as do the times when it is
running but is not actually being used. This can result
in a significantly reduced level of vibration strain over
the work period as a whole.
CE Declaration of Conformity
We declare, with sole responsibility, that this product
complies with the following standards or normative
products: EN 55014, EN 61000, EN 60745-1:2009
+ EN 60745-2-1:2010 in accordance with the
provisions of directives 2004/108/EC, 2006/42 EC,
2011/65/EU
Gaimersheim, 28.01.2014
Alexander Essing
Managing Director
Technical documentation can be requested
from:
Collomix GmbH
Abt. Technische Entwicklung
Daimlerstr. 9, 85080 Gaimersheim, Germany
24.11.2014 13:30:11