Human Touch perfect chair PC095 Mode D'emploi Et D'entretien page 4

get ready
UNPACk THE bOxES
Headrest frame
Chair frame
Head sock Arm core 3/16-inch
Allen key
ATTACH THE bACkREST FRAME
1. Raise the chair to an upright position.
For your convenience, and to better position the chair for the remaining
assembly, plug in the chair, then use the electric recline lever to adjust the chair
to an upright position.
CAUTION: Plug the chair into an appropriate power source. Be sure that the
power cord lies beneath the mechanics located underneath the chair.
2. Remove the backrest frame screws.
Using the Phillips-head screwdriver (provided), remove the two
screws from the headrest frame. Retain them for use in step 4.
humantouch.com
Body pad Arm cap (2) Phillips-head
screwdriver
Head pad Head pillow
Some pad sets include a separate
lumbar pillow instead of the upgraded
body pad with built-in lumbar support.
Lumbar pillow
4
Your Human Touch Perfect Chair
®
attach the backrest frame, pads, arm caps, and head pillow, and you're done!
3. Insert the headrest frame into the chair frame.
With the backrest frame positioned so that the headrest can
tilt forward, slide the two ends of the backrest frame into the
open tube ends of the chair frame.
4. Replace the backrest frame screws.
Using a Phillips-head screwdriver, replace the two headrest frame
screws, securing the headrest frame to the backrest frame.
5. Install the canvas backrest support.
Pull the chair canvas firmly upward as far as it will go, wrap the
top flap around the backrest frame and secure it using the hook
and loop fasteners. It is important that the canvas be stretched
tight to provide proper back support.
ATTACH THE bODY PAD
1. Slide the body pad onto the chair frame.
Slide the body pad onto the lower part of the chair frame,
making sure that the frame slides into the fabric pocket located
on the bottom side of the pad.
2. Secure the body pad.
Smooth the body pad into place, from the footrest toward the
backrest. The pad is automatically secured using the hook
and loop fasteners.
requires some simple assembly. Just
®
Top flap
Canvas
5 5