Publicité
USING THE APPLIANCE
(See Fig. 9)
AUTOMATIC PROGRAM MODE
choice (B1), a triangle appears
on the screen (C4) In the case
steam and pastry programs,
successively pressing the
2- The
settings can be modified
for the time of a recipe
(depending on the chosen
recipe,
quantities prepared). Press
the speed selector (B2) or
selector (B3) or the time
selector (B4), the setting
chosen will flash on the
screen (C1-C2-C3).
3- Adjust the setting(s) using
4- When you have finished
modifying all your settings,
start the program. When your
mode, the red indicator light
(B3) lights up to inform you
emits 3 beeps.
(H)
pre-programmed
ingredients
and
(B6).
(B7) to
25
programs P2 and P3
desserts, the appliance automatically
minutes to maintain the preparation ready
for serving.
P3 program, desserts and manual mode,
speed, in order to preserve the preparation
bowl.
(B7). If you open the lid, press
(D2)
warm mode will be automatically stopped.
nue to operate so that the ingredients do not
programs P1 and P2, the appliance
for 40 minutes for your dough to prove. If
remove the bowl, the appliance changes to
pause mode and you have the possibility of
If you wish to stop this mode, press and
(D2) and then remove the
bowl assembly (D) (See Fig. 12).
When the automatic program has started
up, you have the possibility of stopping the
button. The automatic program is then in
pause mode, you have the possibility of
again. If you have chosen the wrong program
and if you want to cancel it, press and hold
(C) displays all
P2
-
(D2) or
EN
Publicité
